Home Distributors/Dealers Case Drawing Products Specials Brochure Order Support Contact Us Join Mail List


BWA20


Download User's Manual PDF


BWA20 Bilge Water Alarm
CE Certified for Europe

CE Certified

Specifications

Operating Voltage:
9 VDC battery. Built-in low battery voltage alarm.

Operating temperature:
0 to 50 deg Celsius ( 32 to 122 deg Fahrenheit)

Size:
100 x 60 x 30 mm (4 x 2.4 x 1.2 inch)

Alarms:
Built-in 85 dB audible alarm. Can be connected to optional External 105 dB Loud Alarm (LA-20)

Sensor:
Rugged solid state stainless steel and ABS plastic solid potted with epoxy resin. Five meters (16 feet) of cable provided. Fully electronic, no moving parts. Will not jam or false alarm.

BWA20 Bilge Water Alarm

The BWA-20 Electronic Bilge Water Alarm uses modern electronics and a reliable solid state stainless steel water sensor to monitor your bilge for the presence of water. If the sensor detects water continuously for more than 15 seconds it sounds a built-in 85 dB audible alarm.

The alarm will continue to sound as long as the sensor detects that water is continuously present in the bilge, or until the reset button is pressed. If the alarm is silenced by the use of the reset button, the BWA-20 will automatically arm itself again as soon as the water has subsided.

A 15 second timer is started when the BWA-20 detects water. If contact is broken with the water for even a moment, the 15 second timer will reset and start over. This prevents false alarms due to a small quantity of water sloshing in the bilge due to boat motion.

The BWA-20 operates from a standard 9V transistor radio battery for one year and will run for two years (or longer) from an alkaline 9V battery. The BWA-20 has a built-in low battery warning system that tells you if the battery needs changing by chirping briefly every few minutes.

Electronic Water Sensor

The rugged water sensor is constructed of ABS plastic, stainless steel water probes and is solid potted with epoxy resin. It is totally waterproof, will not jam or false alarm.

The BWA-20 comes pre-wired to the water sensor with 5 meters (16 feet) of cable and requires only a battery and a screwdriver to install. An instruction manual and all mounting hardware is provided


Home Distributors/Dealers Case Drawing Products Specials Brochure Order Support Contact Us Join Mail List